The classic
The analogue clock with the two hands is known throughout the world from railway station forecourts, school playgrounds and church steeples. g+m elektronik can provide you with a broad range of analogue clocks comprising many attractive design variants. Be it with a frame made of plastic, in white, grey or any RAL-colour – our analogue clocks are eye-catchers. We offer you variants in various sizes, single-sided or double-sided, for wall or ceiling mounting. Opt flat glass, with or without second hand, and line dial or regular dial with numbers. If you so wish, we can also design an individual dial for you. Our analogue clocks are also available as damp-proof and weatherproof versions.

Clock system with analogue clocks
You have the option of having a master clock control several analogue clocks as slave clocks. Your advantage is that all connected slave clocks are operated centrally and thus show a uniform time.

Optimally integrated
If the master clock features a radio receiver, all connected slave clocks show the accurate time from the radio transmitter. In this case, an alternating-polarity minute pulse is transmitted to the socalled slave clock line via a 2 or 4-wire line. All slave clocks are connected in parallel to the slave clock line.

Good timing
On analogue clocks, the minute pulse and the operating voltage are identical. A slave clock mechanism with minute pulse for a single-sided analogue clock corresponds to a power of approx. 5 mA with 24 V line voltage. The total power consumption of all slave clocks results from the num-ber of slave clocks to be controlled, the line length and the wire cross-section. It may not exceed the total output power of the required master clock.

Reliable clock systems
Additional rechargeable power reserve batteries for the master clock allow all connected analogue clocks to continue to run for a certain time in the event of power failure. Switchover between day-light saving time and wintertime is performed automatically.

 

Dials / Hands


Dials / Hands:

Type A: White dial with black numbers 1–12
Type H: White dial with black lines
Type Office: White dial with black smal black lines
Type DIN: White dial with thick black lines black lines

Hands: Black hour and minute hands

Zifferblätter

 

For indoors clocks


Single sided wall mounting

Movements: 24V Minute impulse; Time-Code (TC); LAN (230V or PoE)

General
- Dimensions Ø 230, 300 or 400 mm
- Case in ABS-plastics, (NCS 0502-B) or graphite grey (RAL 7016)
- Dials:
> Version-A-: White dial with black figures 1-12
> Version-H-: White dial with black lines
> Version Office: White dial with fine black lines
- Pointer: Black pointers for hour and minute and as an option red second pointers for clockworks of the type-C-(TC work)
- Level front glass


Options

- Front glass in polycarbonate
- Protective dome in acrylic
- Red second pointers for clockworks of the type-C-(TC work)
- Everybody RAL-or NCS colours as a special manufacture
- Installation version 300 mm and 400 mm available

 

Console for indoor clocks


Wall or ceiling mounting with console

Double or single sided. Single sided wall or ceiling mounting with white aluminium rear panel

General
- Dimensions Ø 230, 300 or 400 mm
- Case in ABS-plastics, (NCS 0502-B) or graphite grey (RAL 7016)
- Case in Aluminium
- RAL-or NCS colours as a special manufacture


 

For in- and outdoor clocks, IP54


Single sided wall mounting or double sided with console for wall or ceiling

Movements: 24 V Minute impulse; Time-Code (TC); DCF; LAN (230V or PoE); WiFi; Quartz with batterie

General
- Dimension 400, 600, 800 or 900 mm
- Case in aluminium, color dust-grey (RAL7037)
- Dials:
> Version-A-: White dial with black figures 1-12
> Version-H-: White dial with black lines
> Version Office: White dial with fine black lines
- Pointer: Black pointers for hour and minute and as an option red second pointers for clockworks of the type-C-(TC work)


Options

- Front glass in polycarbonate
- Protective dome
- Red second pointers for clockworks of the type-C-(TC work)
- Everybody RAL-or NCS colours as a special manufacture
- Console for wall or ceiling mounting


 

Accessories


In wall mounting for analogue clocks

Wooden inlet case with metal ring for mounting in cement walls. For analogue clocks Ø 300 and 400 mm.